NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition Review

Average Reviews:

(More customer reviews)My husband has a computer business and has purchased 5 of these devices for various customers. Each and every one of them have failed. Three of them within the 3 months Netgear will provide free support for and two of them after 1 year.
When they work they don't work so well, a lot of disconnects, and network not found. Working with support stated that too many wireless networks in a congested area will cause this. Understandable, but hardware failures are not understandable.
Out of the five of them, Netgear has replaced the three that failed withing the 90 period and they have been taken out of service since then. There were too many network disconnects to be useful.
When they fail the power light comes on, but nothing else. No network light when the cat5 cable is plugged into it, nor does the wireless work on the device either.
My husband made the mistake of purchasing them when they were fairly new and paid over 170.00 per. What a mistake. DO NOT PURCHASE THIS AS IT IS JUNK.

Click Here to see more reviews about: NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition

The NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition lets you easily set up a wireless network in your home so you can share a single internet connection with everyone in your household at speeds up to 300 Mbps. You can stream music and video, make internet phone calls, videoconference, and surf the web, all at the same time.
Easy Setup The WN802T makes it easy for even a novice to set up a wireless network: just plug the included Ethernet cable from your LAN into the device and insert the included CD into any computer on the network, which will provide step-by-step instructions. The WN802T offers a myriad of placement options by including a stand for vertical placement and also a wall-mount kit.
The WN802T employs a web-based interface for configuration for compatibility with any computer with a web browser. The firmware is also upgradeable via the web interface so you can be sure your access point will always be up-to-date.
New Technology Means Blazing Speeds and Backwards Compatibility The WN802T complies with the latest 802.11n draft specification which allows for speeds up to 300 Mbps; this maximum speed can be achieved when used with other TopDog devices. By utilizing MIMO (multiple-input, multiple-output) technology, the WN802T has speed and range far surpassing the older 802.11g standard. The preset antennas in the access point ensure that the device is always tuned for optimal performance, and NETGEAR's Wi-Fi Multimedia technology optimizes audio, video, and voice applications.
By using Gigabit Ethernet for the backend, you'll be certain that the access point is receiving data at the highest possible speeds, ensuring the 300 Mbps wireless throughput is not going to waste.
If you still have computers that use 802.11g or 802.11b, don't fret as the access point is backwards compatible with the older wireless standards and can be set so all your computers can connect to the network. The access point will automatically figure out the connection type and work accordingly.
Security Made Easy NETGEAR's Touchless WiFi Security makes it quick and easy to set up network security on a WiFi network by asking for a passphrase from the user. The WN802T supports WiFi Protected Access (WPA2-PSK, WPA-PSK), and 64-bit and 128-bit WEP encryption for 802.11b/g networks. Additionally, you can set security through MAC address authentication, allowing only authorized users onto the network. There is also support for 802.1x RADIUS support with EAP TLS, TTLS, and PEAP.
The NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition is backed by a 1-year warranty.
What's in the Box WN802T RangeMax Next Wireless-N Access Point, power adapter, Ethernet cable, stand, wall-mount kit, resource CD, installation guide, warranty/support information card.

Get 17% OFF

Click here for more information about NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition

Read More...

Netgear ME101 802.11b Wireless Bridge Review

Average Reviews:

(More customer reviews)This has got to be one of the worst wireless products to come out of Netgear.
If you want a reliable unit, buy something else.
If you want something easy to configure and install, buy something else.
If you want something that won't get confused when it starts seeing your neighbor's wireless access point, buy something else.
If you would like to be able to call technical support and get a meaningful response, buy something else.
This thing locks up all the time. Sometimes it lasts 15 minutes, sometimes you might get 30 minutes of use out of it. Then you have to power cycle it to make it work again for another 15 minutes. I have tried to mate it to wireless access points made by Netgear, D-Link, Linksys, Adaptec, Cisco. I have tried having only one AP "visible" in its pitiful range; having multiple access points; upgrading the firmware. Nothing changes its behavior of random locks after a relatively short period of time from the moment you turn it on.
Finally, if you don't want to end up like me writing reviews on here, BUY SOMETHING ELSE! Anything.
It can not possibly be any worse than this utter failure and ripoff.

Click Here to see more reviews about: Netgear ME101 802.11b Wireless Bridge

The NETGEAR ME101 802.11b Wireless Ethernet Bridge makes it easy to connect your gaming console, PC or Internet radio to your wireless network. No additional Ethernet cabling is required, and no other adapter is needed to connect a device that has an Ethernet port. With its attractive, sleek platinum casing, the ME101 can be conveniently mounted on the wall without your home decor taking an aesthetic hit. The powerful, detachable antenna provides greater range and signal strength than most other Wi-Fi wireless devices.

Click here for more information about Netgear ME101 802.11b Wireless Bridge

Read More...

NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111) Review

Average Reviews:

(More customer reviews)Old Setup
Netgear WGT624NAv3 (G - 108Mbs)
Netgear WGPS606 (Print Server/Bridge 54 Mbs)
New Setup
Netgear Rangemax WNDR3700
Netgear WNHDEB111
Background:
I honestly hated Netgear. The nightmares I had with my old setup were terrible. I constantly had to reboot the router; the bridge required me to reconnect wireless devices in a certain order every time; my fiance's Apple never stayed connected long; bittorrent, VPN and video streaming knocked the router out the few times it was working; and the customer service is just horrible. I swore I'd never buy another Netgear product, but I finally had to buy something that would at least work for my fiance. I waited a few months for 802.11n to mature a bit, and was going to get the DLINK DIR-655. Recently it's had horrible firmware issues though and the other brands had low reviews. Then along came the WNDR3700.
The reviews were great so I picked it up and this bridge. I fully expected it to work as badly as my previous Netgear products, but I felt I had to give it a shot.
Conclusion:
I've had this product connected to my WNDR3700 for two days now and it works flawlessly. I have had many wireless setups and this is the best I've ever seen. I've seen people complain that it's on the 5Ghz frequency only, but it works great. All of my other systems are wired or on the 2.4Ghz frequency so I have very little overlap. Of course the WNDR3700 is dual-band so that may not be the same for everyone. I will update this if anything changes but for now I'm extremely happy. It could work at half the speed it does and I would still be happy to have something that just works for once.
Update:
Everyone in my home has problems with the iphone and this router. We constantly get disconnected. It's a known issue on their forums. There is a recent update that helps a lot but almost everyday I still lose my connection and have to re-enter my password. Otherwise this router is still working amazingly. I've only had to reset it one time.
Update:
The last update pretty much fixed the iphone issues. I rarely have to reconnect my phone anymore. If you plan on using the USB storage part of the device though I'd recommend reading the Netgear forums. Some people have had some issues with this.

Click Here to see more reviews about: NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111)

The NETGEAR WNHDE111 5 GHz Wireless-N HD Access Point/Bridge lets you create a 5 GHz Wireless-N access point by simply connecting it to an existing router/gateway. The resulting wireless network lets you transfer data at the highest possible Wireless-N speeds, making it an ideal solution for network gaming and streaming HD videos. By utilizing patented metamaterial antenna technology, the WNHDE111 offers a speed and range far surpassing the older Wireless-G standard.
Easy Setup Simply connect the WNHDE111 to your router/gateway. Setup is easily and securely done with a simple "Push 'N Connect" feature using Wi-Fi Protected Setup (WPS), which eliminates the need to remember or input security password keys. The device automatically configures itself to access point or bridge mode depending on the type of Ethernet enabled device it connects to.
You can easily extend your wireless network by purchasing more WNHDE111 units, or start with the NETGEAR HD/Gaming 5 GHz Wireless-N Networking Kit.
Minimal Interference = Outstanding Performance Most wireless devices today, such as Wi-Fi devices, cordless phones, Bluetooth devices, microwaves, and baby monitors, operate on the 2.4 GHz frequency, creating a lot of traffic and interference. The WNHDE111, however, operates on the 5 GHz band, which has up to 23 free channels and avoids the interference from most other devices.
The WNHDE111 complies with the latest Wireless-N draft specification for the fastest possible Wireless-N speeds. Automatic Quality of Service (QoS) ensures prioritization of voice, video and gaming traffic. It also supports wireless "ad-hoc" mode for wireless LAN peer-to-peer gaming and supports multicast point-to-multi-point HD video streaming.
The WNHDE111 supports WiFi Protected Access (WPA2-PSK, WPA-PSK), and 64-bit and 128-bit WEP encryption and is backed by a 1-year warranty.
What's in the Box WNHDE111 5 GHz Wireless-N HD Access Point/Bridge, stand, Ethernet cable, setup CD, power adapter, and warranty/support information card.

Click here for more information about NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111)

Read More...

Cisco-Linksys WAP54G Wireless-G Access Point Review

Average Reviews:

(More customer reviews)I'm using the unit in a REPEATER mode. My house have 3 floors and my router (WRT54G) is located in the basement. I get a signal of 11 Mbps on the sec flr using a centrino powered notebook. The signal would drop to 1 Mbps after some use and the only way to get the signals back is to to reboot the notebook for some reason or go to the first flr. Hence, decided to get this unit and use it as a repeater.
Steps that worked for me are as follows:
01. Disable any security you have on the router (I'm using WEP) and enable SSID broadcast prior to any configuration .
02. Configure the unit using the setup disk and provided the ff:.
---- Provided a different SSID (or you can provide the same SSID) with enabled broadcast.
---- No encription
---- The same transmission channel (Chan 11) as with my router
---- New password
03. Exited program setup. Run browser and connect to the AP interface using the default address [...]
04. Configured the AP in REPEATER MODE placing my router's wireless MAC address as the repeated source signal.
05. Saved the setup.
06. Test if working by removing the wire behind the AP. On your PC/Notebook, open up a command window (START,RUN, type in "cmd" and click [OK]). Type in "ping 192.168.1.245" and press [ENTER]. You should see something like "Reply from 192.168.1.245 bytes=32 time=3ms TTL=225". If you get a "Request timed out." then that means your AP cannot be seen in your network and was not configured successfully go through STEP#1 again.
07. If successful, you need to enable security back (NOTE: At this point, the AP is running stand alone with no wires connected at the back from the router). Since I'm using WEP, connect to the AP using a browser at [...]
Go to wireless security and enable WEP and add the key codes and save your setup.
08. Now enable security back on the router with same key as you have on the AP and save your setup.
09. Test connection again by running STEP#6.
10. Place the AP where you want it to.
11. With a wireless PC/Notebook, scan for wireless networks. You should see the new SSID as well as the old one. Connect to it so that your PC/Notebook would save that information.
12. Connect to your AP, disable SSID broadcast, save setup.
13. Connect to your roter, disable SSID broadcast, save setup.
14. You're done!I placed the WAP54G on the third floor. After all is said and done, my signal was boosted to 45 Mbps (max at 54 Mbps). Works like a charm!!!
NOTE:
- These procedures is specifically if you want to configure your AP as a REPEATER.
- If you configure the AP with WEP security on the get go, you will never be able to get it to work!! I spent hours on this to no avail.
- You can use the same SSID. I used a different one because I want to see what wireless unit I am connecting to when i transfer from floor to floor.
UPDATE 031810
The unit I believe is starting to die on me. My internet access will get cut off all of a sudden and it has been happening frequently (like 4-5 times a week). I have to unplug then plug it back to make it function again. I might upgrade my system to the WRT610N and WAP610N soon.
UPDATE 033110
I decided to get a new WAP54G instead since reading through the WAP610N manual, there is no provision for a REPEATER mode. I placed the old one on the first floor. So now, I have the WRT54G on the basement, my old WAP54G on the first floor and my new WAP54G (with a NETGEAR 5 port switch connected to it) on the 3rd floor. I noticed that with the new one, my web browsing is a lot faster compared to the old one!
UPDATE 041110
So I had the NEW WAP54G for a couple of days since my last update and I still had the same problem of getting disconnected intermittently. I tried shutting down the OLD unit totally but the issue persists with the new unit so it looks like the AP is not the problem. Now, my IPOD TOUCH 32GB 3Gen needed repair and has been out of commission since last Friday 04/09 (bought this last January). And guess what? I have had no problems with my WIFI connection since then (both APs running). I have to see if the replacement Ipod screws up my wifi connection again but I do think I found out the culprit for my WIFI issues.
UPDATE 042510
I got my new replacement Ipod Touch a week ago. My WIFI failure started again but not as frequent. Now, I always turn off the Ipod's Wifi when I'm not using it. I guess I'm stuck with it.
UPDATE 072610
When I got the IOS 4 software update for the Ipod Touch, my WIFI issues disappeared. :)

Click Here to see more reviews about: Cisco-Linksys WAP54G Wireless-G Access Point

The Linksys Wireless-G access point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your network. Because both standards are built-in, you can protect your investment in existing 802.11b infrastructure, and migrate your network clients to the new screaming-fast Wireless-G standard as your needs grow.
For more information on the differences between an access point and a router with access point, see the following table: To protect your data and privacy, the Wireless-G access point can encrypt all wireless transmissions. The MAC address filter lets you decide exactly who has access to your wireless network. Configuration is a snap with the Web browser-based configuration utility.
Wireless-G is the upcoming 54 Mbps wireless networking standard that's almost five times faster than the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country--but since they share the same 2.4 GHz radio band, Wireless-G devices can also work with existing 11 Mbps Wireless-B equipment.
Future-proof your wireless network with the Linksys Wireless-G access point. You'll enjoy Wireless-B connectivity today, and be prepared for a high-speed Wireless-G tomorrow.
The Linksys Wireless-G access point is compatible with Windows 95, 98, Me, NT 4.0, 2000, and XP.

Click here for more information about Cisco-Linksys WAP54G Wireless-G Access Point

Read More...

TRENDnet 54Mbps Wireless G Access Point TEW-430APB (Blue) Review

Average Reviews:

(More customer reviews)I have a couple of computers in one room, connected via LAN to a Linksys Wireless G router/access point, which is connected to a DSL modem. I wanted to put another computer an an Ethernet-attached printer on the floor above. The standard way to do this would be to run a Cat-5 cable from the Linksys router to a small hub on the upper floor, and connect the new computer and printer to it. It would be a long and complicated run, though, and would involve drilling through the floor. Not impossible, but I didn't really look forward to doing it.
This device seemed to be just what I was looking for: a way to replace a long run of Cat-5 cable with a wireless link. Put the TRENDnet Access Point on the upper floor along with a small hub (the Access Point has only one Ethernet jack), and plug the computer and printer into the hub.
The Access Point offers five modes of operation. The one I expected to use is called "WDS", for Wireless Distribution System. From the user manual, it appears as if this is the mode for just extending a LAN as I wanted to do. I was never able to get this mode of operation to communicate with the Linksys router. The manual is not well written, and the help windows from the Access Point's built in web server are even worse. Using browsers to look at the settings of both the Linksys and the TRENDnet, I verified that everything that I can set was entered correctly: Channel number, SSID, passphrases, MAC addresses, everything. No connection was ever made, in WDS mode.
So I tried "AP + WDS" mode; still nothing worked.
Finally I tried "AP Client" mode, in which (quoting now) "the AP will be a wireless Ethernet adapter transforms any Ethernet-enabled devices to have the wireless function." From the diagram, it would seem that only one device (computer, printer) could be attached. I tried connecting the switch with both computer and printer to the Access Point in this mode, and finally it all works.
Now that it's working, it is doing just what I wanted it to. The new computer can access the internet and share files with the ones downstairs, the downstairs computers can print on the upstairs printer, and so on.
The poor manual and even worse help text really drags this product down. I would have rated it much higher if it hadn't required so much experimentation to get it going.

Click Here to see more reviews about: TRENDnet 54Mbps Wireless G Access Point TEW-430APB (Blue)

TRENDnets TEW-430APB Wireless Access Point is todays link to Wireless Technology. Compliant with the IEEE Wireless Networking Standard 802.11g, it provides Direct Sequence Spread Spectrum (DSSS) operation for transparent bridging and roaming capabilities for wireless nodes. The TEW-430APB also provides WDS bridging functions, allowing users to connect two or more Access Points together, wirelessly. With TRENDnets Wireless Access Point and Wireless Network Adapters, users can connect to Ethernet/Fast Ethernet LAN at home or office to access network resources such as hard drives, CD-ROM/DVD drives, network printers, and Internet connection - with coverage up to 300 meters.

Get 31% OFF

Click here for more information about TRENDnet 54Mbps Wireless G Access Point TEW-430APB (Blue)

Read More...

TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black) Review

Average Reviews:

(More customer reviews)Home networking can be a real pain especially for someone like me who knows enough to be dangerous but not enough to be a network installer. I have a wireless router burried in my basement that wasn't getting signal to my upstairs part of the house. I tried two other different products 1) two routers connected to each other and 2) a Hawking repeater. I ended up wasting a lot of time with them and they just didnt work or had compatibility issues. I took a plunge on the no brand trendnet based on this other positive review and he was 100% right. The price is 50% cheaper than the comparable Linksys N switch and does exactly as advertised. Setup took 5 minutes and I now have coverage all over my house. No issues so far.

Click Here to see more reviews about: TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black)

TRENDnet 300Mbps Wireless N Access Point TEW-638APB Wireless Access Points

Get 31% OFF

Click here for more information about TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black)

Read More...

Cisco WAP4410N Wireless-N Access Point - PoE/Advanced Security Review

Average Reviews:

(More customer reviews)I recently purchased two of these Cisco WAP4410N WAPs. The goal was to help my brother-in-law cover his large home with good quality wireless. Based on my experience doing previous WAP installations, my guess was that is would take between three and six WAPs to full cover his large house (which has lots of brick and steel) with good quality coverage. I was impressed that by strategically positioning the units I was able to cover the entire house with only two of these WAPs. The coverage consisted of three floors (one was a finished basement).
The setup of these units was simple, the firmware is stable, and configuration was straight=forward. Since they were setup they have worked flawlessly and required no further attention.
The only thing a bit unusual (for those used to Netgear, Linksys, etc.) is that you have to setup a Cisco account (no charge just register online) to be able to download firmware, etc. This ended being unnecessary because the firmware in the unit was up-to-date.
If you're looking for really good WAPs that support Wireless-N and have lots of configuration options (e.g., Mesh, Multiple SSIDs, etc.) I highly recommend this unit. It has a slightly higher price than other (consumer units) you can buy, but it definitely deserves the "business-class" label that Cisco gives it.

Click Here to see more reviews about: Cisco WAP4410N Wireless-N Access Point - PoE/Advanced Security

Why string cables across your workspace when clients can connect to your internal network using wireless technology? Formerly Linksys Business Series, now Cisco Small Business Wireless Access Points, the WAP4410N is an 802.11n access point that provides secure, high performance network access.You can now extend your wired network to mobile employees within the workplace to keep them connected and productive.

Get 33% OFF

Click here for more information about Cisco WAP4410N Wireless-N Access Point - PoE/Advanced Security

Read More...

D-Link DWL-G700AP Wireless Access Point, 802.11g, 54Mbps Review

Average Reviews:

(More customer reviews)I use this AP as a second broadcast point at the other side of the house because me router can't reach that far. The connection strength, even when going upa floor and over about 50 feet is "Very Good". The configuration, if you even want to do any, is very simple to acomplish. The speed is fine throughout the house.

Click Here to see more reviews about: D-Link DWL-G700AP Wireless Access Point, 802.11g, 54Mbps

The DWL-G700AP is Wi-Fi IEEE 802.11g compliant, meaning that it can connect and interoperate with other 802.11g compatible wireless devices. With the ability to transfer files at up to 54Mbps, the DWL-G700AP gives you high-speed wireless access. The DWL-G700AP is also backwards compatible with 802.11b networks and devices. With its Web-based setup wizard, the DWL?G700AP ensures that you will be up and running in just a matter of minutes. The DWL-G700AP also includes an embedded DHCP server that can automatically assign IP addresses to wireless clients. The DWL-G700AP features Wi-Fi Protected Access (WPA) to provide an enhanced level of security.

Get 26% OFF

Click here for more information about D-Link DWL-G700AP Wireless Access Point, 802.11g, 54Mbps

Read More...

ZyXEL WAP3205 Wireless N access point, Ethernet client, and universal repeater Review

Average Reviews:

(More customer reviews)Once you have it setup it works flawlessy. Problem is setting it up for the first time. Documentation is not user friendly to the non-tech savvy. I'm using it as a wireless bridge / access point with my Sony blue-ray player. I already have a Linksys wireless router using WEP encryption (forced to use this because my XBOX 360 doesn't support WPA). To make it easy for others doing the same thing use the following steps:
1. Change your pc or laptop's ethernet adapter's IP address to 192.168.1.3 To do this on Vista or Windows 7 you open you network sharing center then you open your ethernet LAN adapter settings (or manage network connections in Vista). Select the Internet protocol v4 (IPv4) and go into properties. Manually put in the IP address with subnet mask of 255.255.255.0 and don't worry about the gateway address.
2. Connect your WAP3205 to your pc/laptop with the ethernet cable that is provided. Of course make sure you plugged in the power to it or your going nowhere. Open up your preferred browser (IE, firefox, netscape, etc.) and then type in the address bar 192.168.1.2 and now you will be connected to the WAP3205. Type in the default password of 1234, you are now prompted to change your password to whatever you want it to be.
3. Now that your in the WAP3205 click on Expert Mode. When in this mode on the far left you will see Status and below it Monitor, Configuration and Maintenance. Click on Maintenance and then hit the plus sign in front of Maintenance once you are in. Go to the last option of Sys OP Mode then select Client Mode and hit apply.
4. Go back to the far left and hit configuration then go to Wireless LAN. You will see tabs for Profile, Site Survey and WPS. Hit the Profile tab and then hit the Add button. Type in your network name / SSID and then select your security drop down box. Select WEP if you have a setup like me with the XBOX 360 or if you don't care about security select the no security option. Type in your passphrase that you use for your router's security or the actual 128 bit security code (or 64 bit if that is what you use) and hit apply. Then select your newly created profile and hit the activate button. If it's configured correctly you will get a green check. Now your done on this end.
5. Disconnect your WAP3205 from your pc/laptop and change your pc or laptop's ethernet adapter settings back to whatever it was before.
6. Go to your blue-ray player and disconnect the power cord for about a minute or more. Connect the WAP3205 to the blue-ray player with the ethernet connection and power your blue-ray player back on. The blue-ray player will automatically pick up the network settings from the WAP3205 and you will be done.
Hope this is helpful and if you don't have an XBOX 360 or if you use WPA for security the setup should be easier.
So far so good with the Zyxel WAP3205...I had used the Linksys WET610N (2 separate units) and they both failed. The first one worked a couple of days before the wireless stopped working and the second one's wireless failed right out of the box. The WET610N's are way easier to configure but they are too expensive and for me totally unrealiable. The WAP3205 is a steal and worth the effort when you consider the rock solid connection I have now, besides it was less than half the price of the Linksys. It's not as nice looking as the Linksys that's for sure but the main thing is it works as described.

Click Here to see more reviews about: ZyXEL WAP3205 Wireless N access point, Ethernet client, and universal repeater

WAP3205 is more than just another 300Mbps access point; it's a multifunction 11n tool that can be used in a variety of scenarios.In addition to Access Point mode, it can also be a Universal Wireless Repeater, extending the range of your existing network.Unlike other repeaters, the WAP3205's extender mode works with the latest WPA/WPA2 security technologies, so security doesn't have to suffer when extending your network.The WAP3205 also has the ability to function as a wireless bridge, allowing you to connect non-wireless network compatible devices to your existing network.Simply plug in your Ethernet based TIVO, Smart TV, Blue Ray player, network storage device (NAS), or game system into the WAP3205, and it can now join your wireless network.No software or drivers to be installed. With an 11n compatible data transfer rate of up to 300Mbps*, which is 6 times faster than 11g, you can enjoy high-speed network connection and high-definition video streaming with no jitters or dropped calls.It also works with your existing 802.11b and 802.11g network devices. Some wired devices such as modems, set-top boxes, digital media adapters and storage devices might not be natively wireless capable. In order to connect these without additional wiring, driver installation or configuration, just plug the Ethernet cable into the WAP3205 and connect to another wired device to get connected wirelessly. With the built-in Universal Repeater mode, WAP3205 can connect to most popular access points or wireless routers while simultaneously acting as an access point to provide wireless connectivity to all other wireless devices such as notebooks. In other words, WAP3205 can extend the wireless coverage to the entire home premise and enable all wireless devices to link to the existing networkthis is especially helpful for larger home environments.Since this is all done wirelessly, there’s no need to run additional Ethernet cables to extend your network

Get 29% OFF

Click here for more information about ZyXEL WAP3205 Wireless N access point, Ethernet client, and universal repeater

Read More...

NETGEAR WG602 54 Mbps 802.11g Wireless Access Point Review

Average Reviews:

(More customer reviews)I bought this item, because, on the back of the box, it shows the WG602 being used as a bridge to connect to a WGT624 access point. This is extremely misleading, and well, plain wrong, as a couple of other reviewers have pointed out. I was on the phone with extremely unhelpful tech support (that they outsourced to India, I believe), and it took several hours of run-around for the support guy to actually admit that the two products are not compatible (he had to ask someone else). Had he researched this properly in the beginning, hours would have been saved. I was eventually informed (after being told to upgrade firware, change numerous settings, etc.) that the WG602 would only bridge to another WG602. THE BACK OF THE BOX IS WRONG! Don't buy this if you're looking for a bridge that's compatible with any other AP.

Click Here to see more reviews about: NETGEAR WG602 54 Mbps 802.11g Wireless Access Point

The NETGEAR WG602 54 Mbps 802.11g Wireless Access Point lets you easily set up a wireless network in your home so you can share a single internet connection with everyone in your household at speeds up to 54 Mbps. Note that to share an internet connection you will need a router into which you can plug the WG602 access point. If you do not have a router, consider NETGEAR\'s Wireless-G Router WGR614."
Easy Setup The WG602 makes it easy for even a novice to set up a wireless network: just plug the included Ethernet cable from your LAN into the device and insert the included CD into any computer on the network, which will provide step-by-step instructions. The WG602 offers a myriad of placement options by including a stand for vertical placement and slots on the bottom for mounting on a wall or ceiling. The default 2 dBi omnidirectional antenna can be removed and you can install an external antenna most suited for your needs onto the standard SMA connector.
The WG602 employs a web-based interface for configuration, allowing you to adjust settings such as the beacon interval, RTS threshold, and DTIM interval. The firmware is also upgradeable via the web interface so you can be sure your access point will always be up-to-date.
Fast and Secure Supporting the 802.11g standard, the NETGEAR WG602 offers data speeds of up to 54 Mbps, making it possible to share a broadband internet connection, stream music without hiccups, watch videos with less load time, and videoconference without problems. Downloading files is up to five times faster than it was with 802.11b. If you still have computers that use 802.11b, don't fret as the access point is backwards compatible with the older wireless standard and can be set so all your computers can connect to the network and the WG602 will automatically figure out the connection type and work accordingly.
The WG602 offers many security options to ensure your data is private. Both 40/64-bit and 128-bit WEP encryption is available, as well as Wi-Fi Protected Access (WPA2-PSK). You can also use MAC address authentication to allow only authorized users onto the network.
Bridge and Repeater Mode In addition to functioning as an access point, the WG602 can also be used as a bridge and as a repeater. Used as a bridge, the device allows you to connect two LANS wirelessly; as a repeater, your wireless signal's range is extended so even the remote corners of your home or office can be covered.
The NETGEAR WG602 54 Mbps Wireless Access Point is backed by a 1-year warranty.
What's in the Box WG602 54 Mbps Wireless Access Point, vertical stand, power adapter, Ethernet cable, resource CD, user's guide, warranty/support information card.

Click here for more information about NETGEAR WG602 54 Mbps 802.11g Wireless Access Point

Read More...