Linksys SPA3000 Analog Telephone Adapter 1 Port FXO + 1 Port FXS Review

Average Reviews:

(More customer reviews)This is a powerful product, but with lots of settings, no manual, and some complexity to configure. Once configured, it works beautifully. I've configured it so that our local calls go out through our regular local phone company on the regular local phone line, but our long distance calls seamlessly go out via SIP on our VOIP provider. My non-technical wife just picks up the phone and dials any number, and it automatically figures out how to place the call for a good rate. Incoming calls just come in seamlessly. Caller ID works fine. It took about five evenings to get it set up properly, and I have a degree in computer science and lots of computer networking experience.
There's no manual provided with the product, and Sipura has not made the manuals easily visible on their website. If you're thinking about this product, do a web search for help in figuring out how to configure it. This is NOT something you'll just figure out without documentation.
Some embedded documentation would help this product tremendously. It's mostly configured via a web browser; while configuring, I should be able to click a "help" button for an explanation of what the various fields do. Even a well-written paper manual would help (the .pdf file I found wasn't so great). If this product were documented properly, it'd almost certainly rate 5 stars.

Click Here to see more reviews about: Linksys SPA3000 Analog Telephone Adapter 1 Port FXO + 1 Port FXS

The SPA-3000 continues to deliver on Sipura Technology's mission to provide market leading, best-in-class VoIP end points providing freedom and opportunity to service providers and end users.The SPA-3000 features VoIP adapter functionality found in the SPA-2000 and SPA-1000/1 with the additional benefit of an integral connection for legacy telephone network "hop-on, hop-off" applications. SPA-3000 users will be able to leverage their broadband phone service connections more than ever by automatically routing local calls from cell phones and land lines to a VoIP service provider and vice versa.A typical user calling from a land line or mobile phone will be able to reduce and even eliminate international and long distance telephone charges by first calling their SPA-3000 via a local phone number or by using a telephone connected directly to the unit. The advanced authentication and call routing intelligence programmed into the SPA-3000 will connect the caller via the Internet to the far end destination with security and ease. Using the SPA-3000 at the far end, calls can be answered immediately or further processed as a local call to any legacy landline or mobile phone allowed by the SPA-3000 dial plan.

Click here for more information about Linksys SPA3000 Analog Telephone Adapter 1 Port FXO + 1 Port FXS

Read More...

Cisco-Linksys Power Over Ethernet Adapter Kit Review

Average Reviews:

(More customer reviews)
Linksys makes a version of this unit ( WAPPOE12 ) - that is designed for 12 volt systems.

Click Here to see more reviews about: Cisco-Linksys Power Over Ethernet Adapter Kit

The Linksys Power Over Ethernet Adapter Kit lets you put your access points almost anywhere, by removing the requirement of nearby power outlets. By using the existing Category 5 Ethernet cabling to deliver power to any standard 5 volt access point or other network device, you save the time, hassle, and expense of running AC power to the access points installation location. The best position for a wireless access point is usually on the ceiling, in the center of the area to be covered. Second best would be high on a nearby wall. Unfortunately, theres usually no easily accessible AC power plugs available in these locations. With the Power Over Ethernet Adapter Kit, installing the access point in these preferred spots becomes far less trouble.

Click here for more information about Cisco-Linksys Power Over Ethernet Adapter Kit

Read More...

Cisco-Linksys 1 TB Media Hub with LCD Review

Average Reviews:

(More customer reviews)Everything you read about the features and setup of the LinkSys by Cisco NMH410 MediaHub is true: it is very easy to set up and to configure other computers and it does offer a browser-based way to access your media.
The problem is that most of it doesn't work. The lion's share of the software is broken, buggy, or simply incapable of doing what it is supposed to be doing. A quick glance at the support forums will confirm this, and unfortunately it appears to be endemic for many of the models of MediaHub, not just the NMH410. The problems that you will encounter are:
1) The Media Hub Online tool will not "see" all of your files. They will be physically visible when you use a computer to browse folders, but they will not properly share or index, even if they meet the stringent requirements (no long names, no special characters in the names, must be in one of the supported file formats, etc.).
2) The Hub will continually rebuild its index of your files. In other words, "now you see some files, now you don't". It regularly "forgets" what's on the hub and starts over, one by one, re-reading every file. You have no control over when it does this.
3) The Media Hub will not respond when it is busy. I can play an album that I manually launched from the folder, but if I try to open the File Browser, look at Configuration, or even just click a bit too fast browsing the media, the MediaHub Online will throw me "MediaHub is Disconnected or not Responding" errors and stop taking any commands. I have to randomly try again and hope to get lucky and get in.
4) The website for Remote Sharing (in other words, logging in to your device through the Internet from another location) regularly has Server Timeouts. You never know when it will let you in or when you will just get a dead white page.
5) Some features reboot the hub without warning. You choose the option, it says, "Resetting the MediaHub" and the next thing you know, the browser interface fails, the hub loses all of its indexes, and it starts all over again crawling through your files and not responding to your clicks.
It's very distressing to see aggressive releases of software and firmware updates, whose release notes claim to have solved these problems...only to find that all the "fixed in this version" problems are still there. If these issues really were considered fixed by the company, then Linksys/Cisco's problems are much larger--they may need to consider a recall. Thus far, the only features that truly work are the ability to view files and folders on a computer and the optional computer backup program (which should only be used for files and not as a full system backup).
It should tell you a lot that there are actually two pieces of software embedded in this hub: the Linksys by Cisco software, and a third party tool called "Twonky Media Server". Twonky is better, but still not what this product promises above. Both have really bizarre problems that should never have made it to the sales floor.
I'm reaching the point of complete surrender. I managed to get indirectly engaged with the hardware/software development team and have offered them access to my hub to try whatever it takes to solve the problem.
As of October 19, 2009, my unit was used for the Beta and the new Firmware was released. If you own an NMH and are having the above problems, you should give it a try. Unfortunately for me, the best I have seen with this new firmware is that the fixes are spotty: almost seems to mostly-work one day, then it's back to completely acting up the next. The cruel part is that one day I'll discover an amazing new feature or two that I'd never seen before...and the next day it's gone again. Content appears and disappears, and the system is always rebuilding itself. I have spent many, many hours on and off support calls struggling with this device and I'm sorry I bought it. It's November 19th, 2009, and my NMH410 Media Hub is now back in the original packaging waiting to go out the door back to LinkSys. I've lost over 4 months trying to get this to work and I can't recommend it to anyone.

Click Here to see more reviews about: Cisco-Linksys 1 TB Media Hub with LCD

Enjoy your digital music, photos, and videos throughout your home! The Linksys Media Hub stores your favorite media files, and lets you view and listen to them on any PC, laptop, or TV¹ in the house, or through the Internet anywhere in the world! The pre-installed hard drive holds thousands of photos or songs, or hundreds of hours of DVD quality video, and the empty second drive bay and two USB ports let you add even more storage as your collection grows.The Media Hub presents your music, photo, and video collections in an attractive "catalog view" from most web browsers. There are no confusing network addresses to remember; give your Media Hub a personalized "name" (i.e., "Smith-Media"), and just type it into your browser to view the catalog. Use the same name to log in to your Media Hub from a web browser anywhere, and get the same easy-to-use access to your media.³

Click here for more information about Cisco-Linksys 1 TB Media Hub with LCD

Read More...

ZyXEL PLA470 200 Mbps Powerline HomePlug AV Desktop Adapter with Built-In 4-Port 10/100 Fast Ethernet Switch Review

Average Reviews:

(More customer reviews)It's true that HomePlug AV nodes cannot intercommunicate with HomePlug 1.0 nodes. ZyXEL and most, if not all, other HomePlug AV hardware manufacturers are derelict in not pointing out that fact. As an engineer who works with HomePlug almost full-time, I know that AV kicks 1.0's tail in terms of bitrate versus SNR. That doesn't excuse ZyXEL's dereliction, but it gives you cause to ponder retiring your HomePlug 1.0 hardware and replacing it with HomePlug AV hardware. Even if you think you won't benefit sufficiently from HomePlug AV's nominal 14x bitrate improvement, you might need AV's ability to reach more electrical outlets in your building with a bitrate that is usable for your application.
There's another compatibility matter to be aware of. When I examined a new PLA-470 the other day, I was disappointed, but not surprised, to find that the version of firmware installed in the HomePlug AV chipset is an old, pre-standard version, 1.4.5, that is not truly HomePlug-AV compliant and, more importantly, that cannot intercommunicate with subsequent firmware versions. I have not checked to see whether ZyXEL provides the means to upgrade the firmware of the HomePlug-AV chipset. The newest version is 3.0.5. For more detail on the topic of HomePlug-AV-chipset firmware, see my review of the Linksys PLE200.

Click Here to see more reviews about: ZyXEL PLA470 200 Mbps Powerline HomePlug AV Desktop Adapter with Built-In 4-Port 10/100 Fast Ethernet Switch

Get 18% OFF

Click here for more information about ZyXEL PLA470 200 Mbps Powerline HomePlug AV Desktop Adapter with Built-In 4-Port 10/100 Fast Ethernet Switch

Read More...

Belkin F8T030 Bluetooth Access Point with USB Print Server Review

Average Reviews:

(More customer reviews)The tech support was prompt and knowledgeable. The unit has good range which seems to be limitied more by the class of the PDA that is trying to acess it.
HOWEVER this product has a VERY serious design deficiency that makes it UNSUITABLE FOR USE at any price!!!! Belkin tech support has confirmed that there is no way to reset the unit to the original factory settings if you can not acess it via the built in web manager. Belkin tech support also confirmed that there is also a flaw in the unit that will cause some user passwords to not be accepted. Once this happens, this will essentially require returning the unit for complete replacement. I know of no other networking product that has such a serious design flaw (all other networking devices I am aware of have at least a reset button somewhere or a "power on" sequence to handle these inevitable situations). It also makes the unit unusable for any scenario where if you make a change to the settings, you can not afford to be without it for the time to swap it out.
An obvious problem for you, me and Amazon here!

Click Here to see more reviews about: Belkin F8T030 Bluetooth Access Point with USB Print Server

Early Adopters Pick: March 2003 The Belkin F8T030 Bluetooth Access Point allows you to transfer data to other Bluetooth-enabled devices including computers, PDAs and printers as well as to gain Internet access through a connected network.
Offering access to local area networks (LANs) with devices enabled with Bluetooth technology such as Pocket PC PDAs, Palm PDAs, notebooks, desktop PCs, and mobile phones, the Bluetooth Access Point with USB Print Server offers connectivity to the Internet, corporate LAN, and home networks. It also enables any USB printer to be accessed via a Bluetooth connection when connected through the Access Point's USB print server ports. At the same time, the product functions as a USB print server where the printer can be visible to the entire wired LAN, which allows the connected USB printer to be accessed by any client on the wired LAN. Up to seven users can simultaneously share the Internet, the LAN, or print to a USB printer via a Bluetooth connection. It features two USB type A connectors, an RJ45 Ethernet port, and the front has seven multicolored LEDs that depict connection activity quickly and easily.
The Access Point requires no manual configuration. It can be installed and start running in under two minutes, needing only a power source and an Ethernet connection, according to the manufacturer. The IP is obtained automatically via DHCP upon power-up or can be set by any Bluetooth client.

Click here for more information about Belkin F8T030 Bluetooth Access Point with USB Print Server

Read More...

Cisco SR2016 16-port 10/100/1000 Gigabit Switch Review

Average Reviews:

(More customer reviews)I owned this switch for a little over a year. It slowly died taking my LAN with it (slowly). It took me a long time to figure it out since my LAN is fairly complex and contains several switches. However, I had 3ea of the Linksys SR20xx 8-port models die on me much faster. Fortunately, those were much easier to find since they just died completely when they went. So, I am not going to purchase any more of the Linksys SR20xx products. I hope that others are more fortunate, but I have had too many of them fail and am now trying D-Link switches. I used to really like Linksys and their hardware used to work forever (or so it seemed).

Click Here to see more reviews about: Cisco SR2016 16-port 10/100/1000 Gigabit Switch

Whether you're starting from scratch or debating a possible upgrade to your network's internals, speed should be a top priority. The Cisco SR2016 16-Port Gigabit Switchprovides nonblocking, wire-speed switching for your 10-, 100-, and 1000 megabit (Mb) network clients.Formerly Linksys Business Series, now Cisco Small Business Unmanaged Switches, the SR2016 16-Port Gigabit Switchallows the connection of up to 16 separate devices into your network - computers, printers, and servers - to share and transfer files and videos across your network.World-famous Cisco reliability and limited lifetime warranty gives you peace of mind.

Click here for more information about Cisco SR2016 16-port 10/100/1000 Gigabit Switch

Read More...

Cisco-Linksys PLE200 PowerLine AV Ethernet Adapter Review

Average Reviews:

(More customer reviews)See also the Linksys PLK200 Powerline AV Ethernet Adapter Kit, which is more economical.
This product is based on a "HomePlug-AV" chipset than runs a specialized type of sofware known as "firmware". Linksys does not design, manufacture, or maintain this chipset or its firmware. An unaffiliated company does that, and Linksys is just one of dozens of that company's customers.
I've purchased about 20 (twenty) PLE200s over the past year--from Amazon and other sellers--and all of them have shipped with firmware version 1.4.5 installed. The primary purpose of my 'review' here is to caution you that hardware running firmware version 1.4.5 cannot communicate with hardware running newer firmware versions. I hope this caution reaches people who have already purchased the PLE200 as well as those who are contemplating doing it.
Version 2.0 implemented a change that was required to achieve compliance with the HomePlug-AV standard. That change unfortunately rendered 1.4.5 unable to intercommunicate with versions thereafter. Fortunately, no subsequent firmware change will have such a devastating side-effect.
"HomePlug-AV" products currently coming off various manufacturers' production lines are likely shipping with 2.0 or later firmware installed. Be advised that if you wish to build unified network consisting of PLE200s and these other products, you'll have to upgrade the firmware in your PLE200s; otherwise, the PLE200s and the other products won't even "see" each other. Not only that, but they'll probably also step on each other's transmissions because of inability to coordinate their usage of the powerline medium.
The PLE200 ostensibly is compliant with the HomePlug-AV standard, but it actually is NOT compliant with the HomePlug-AV standard until its firmware is upgraded from version 1.4.5 to version 2.0 or newer. As of this writing, 3.0.5 is the newest version.
Linksys ought to provide a binary image of the firmware for download on their web site, but I don't see it. The Windows GUI application that Linksys ships on CD with the PLE200--it has a mechanism for programming a new firmware image into a PLE200, but I've never used it and am not certain it is able to perform the 1.4.5-to-later upgrade even if it were given the appropriate binary image.
Being an engineer who is doing development work in the HomePlug-AV space, I have the means to do the upgrade, but it requires my using some software that is not available to the general public. To the general public who already own PLE200's, I would suggest pestering either Linksys or the chipset manufacturer about the firmware. To everyone else--maybe you can find a HomePlug-AV adapter under a different brand name that comes with firmware version 2.0 or later pre-installed.

Click Here to see more reviews about: Cisco-Linksys PLE200 PowerLine AV Ethernet Adapter

The PowerLine AV Ethernet Adapter lets you turn the existing powerlines in your home or office into a high-speed network. Now you do not have to drill through the walls and climb through the attic or cellar to install network cables -- just use the wires that already run through the building! The PowerLine AV Adapter interfaces Ethernet devices to the HomePlug AV PowerLine network standard. Just plug the PowerLine AV Adapter into the wall, and connect your Ethernet-equipped device to the Adapter using the included network cable, and you have turned your whole house into network infrastructure! Attach more computers to the network by simply plugging them into the wall anywhere in the house, using more PowerLine AV Adapters.

Click here for more information about Cisco-Linksys PLE200 PowerLine AV Ethernet Adapter

Read More...

Cisco SD205 5-port 10/100 Switch Review

Average Reviews:

(More customer reviews)This Linksys SD205 switch rules. First, its mesmerizing because its the same size as the Ipod. Second, it does what its advertised such as connecting other computers together and most importantly, it regenerates signal. I was seriously considering buying a repeater, but they cost a couple hundred dollars. Technically, a hub is supposed to do the same thing but who wants that passive crap. The signal in my network started to attenuate and needed regeneration. This badboy fixed it and its back to full strength. I highly recommend this product if you are needing a component to branch out your network.

Click Here to see more reviews about: Cisco SD205 5-port 10/100 Switch

This newly-redesigned Linksys 5-Port 10/100 Switch can significantly increase your network traffics speed. A switch serves the same function as a hub in a network design -- tying your network equipment together. But unlike a simple-minded hub which divides the networks bandwidth among all the attached devices, a switch delivers full network speeds at each port. Installing this cost-effective 5-Port 10/100 Switch can potentially increase your network speed by five times. It is the perfect way of integrating 10Mbps Ethernet and 100Mbps Fast Ethernet devices, too. All five ports are auto speed negotiating, and have automatic MDI/MDI-X crossover detection, so you dont have to worry about the cable type. Each port independently negotiates for best speed and half- or full-duplex mode, for up to 200Mbps of bandwidth per port.

Click here for more information about Cisco SD205 5-port 10/100 Switch

Read More...

D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b Review

Average Reviews:

(More customer reviews)Products Tested: D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b D-Link DWL-650 11Mb Wireless PCMCIA LAN Network Card 802.11b vs. Linksys WAP11 - Instant Wireless Network Access Point Linksys WPC11 - Instant Wireless Network PC Card
Computer Hardware: Laptop: Dell Inspiron 600mhz, W2k Network: NT 4.0 Server, W2K Server Switches: 3Com and Linksys
Quality: After working with dlink first, linksys blew away dlink on the feel of quality and workmanship. As we all know, these components are so miniaturized that they could put them into any light-weight enclosure. dlink chose the light packaging approach....feels "cheap." linksys chose the mid-weight package...you feel as if it has higher quality...and you got something for your $250-300! linksys chose the dual antenna design over the single on the dlink. Technically, I am not sure if it is better but the actual reception really is... These are subjective and personal factors but for most, it makes a difference.
Ease of Use: From the documentation, to the support, to the software, it is really apparent dlink cut costs everywhere and with things they shouldn't. The setup is extremely confusing, the software is buggy...really, and the docs are horrible. In my manual, every other page did not have printing on it...quality control missed this! Linksys...even though I had to use the USB setup at first (dlink does not have a USB port on their access unit), the configuration was simple. The docs actually explained the parameters on the configuration screens. Once I set the IP address to one recognized on my network (I am not using DHCP), I used the linksys SNMP configuration tool to set and adjust the other parameters. I have a laptop. When using the wireless network card on the dlink, if you eject the card, the next time you re-insert the card, it does not remember your setting. You have to go back and set the parameters in order to get the card to function again. I called dlink tech support on this...on hold forever, hung up, and no call back...even when they asked and I left my mobile number, just in case... On the linksys, when I re-inserted the wireless card, it remembered the setting.
Service and Usability: Both products have a signal and quality meter in their utilities. One important note...the distance specs on both of these products (I think the 802.11b category overall) are NOT accurate. Inside of your home and through walls, etc., expect much less. How much less...you need to try it out to be sure. If you have line of sight to the access unit, these distances will go up. I mounted the access unit in my living room, on top of the entertainment center. I chose this location b/c it had the best reception. With the dlink, in the master bedroom (through one wall!), I was *barely* able to use the network...0-40 on the signal meter. On one occasion, once the dlink card lost the network, I could not get back on?? The total distance to the access unit was 30ish feet. With linksys, my signal was consistent at 40-60...once or twice is dipped to 20-30 but came right back up. I also tried a configuration with the dlink access unit and linksys card. They did work together but I could not improve the signal quality. I concluded that the dlink access unit was one of the problems. When I used the dlink wireless card, several times my computer shut down automatically??
Overall: Save tons of time and money...just buy the linksys system...access point and cards. Linksys is priced well and makes a quality offering. It is very clear to me that dlink is just focused on price and cutting their cost.

Click Here to see more reviews about: D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b

The D-Link DWL-1000AP is an IEEE 8.02.11b-compliant, 11 Mbps wirelessEthernet access point designed for use in office and home environments. Itoperates in 2.4 GHz direct-sequence spread spectrum (DSSS), which providestransparent bridging and roaming capabilities to wireless nodes at ranges up to100 meters indoors and 300 meters outdoors. The DWL-1000AP supports Wired Equivalent Privacy (WEP), MAC address control, anduser authentication to ensure a secure network connection. When connected to anEthernet LAN, the DWL-1000AP automatically identifies the IP of the host PC aswell as the subnet. In addition, the IP address of the DWL-1000AP can bemanually assigned. The bandwidth data transmission rate can be set automaticallyusing the dynamic auto-sensing configuration or set manually to 11, 5.5, 2, or 1Mbps. You can manage the DWL-1000AP remotely with its access point manager software,which can be installed on Microsoft Windows 95 OSR2, 98, 98SE, NT 4.0, Me, and2000.

Get 58% OFF

Click here for more information about D-Link DWL-1000AP 11Mb Wireless LAN Access Point 802.11b

Read More...

HP ProCurve Switch 1400-8G 8-Port 10/100/1000 Gigabit Network Switch Review

Average Reviews:

(More customer reviews)These are great switches and just as fast as the compitition with ONE exception.. THEY DONT BREAK!
I've used them all and the major complaint I have with most home switches is the HEAT they generate. You can put money down that Your Cisco Linksys or DLINK switch is going to last about a year. They do give you a warranty and an easy replacement but I would rather buy a switch that I didnt need to exorcise the return policy every 1-2 years thank you very much.
The ProCurve Switches use external brick type power supplies that keep the heat away from your switch processor. This May be an issue for Business applications that use rack mounting, but for home use ProCurve hits a Home Run!

Click Here to see more reviews about: HP ProCurve Switch 1400-8G 8-Port 10/100/1000 Gigabit Network Switch

The HP ProCurve Switch 1400-8G is a small form factor gigabit unmanaged stackable switch with 8 ports of 10/100/1000. It features fan-less for silent operation. Primary InformationNetworking Type:SwitchForm Factor:ExternalData Transfer Rate:1 GbpsData Link Protocol:Ethernet; Fast Ethernet; Gigabit EthernetNetworking / Ports Qty:8 x Ethernet 10Base-T Ethernet 100Base-TX Ethernet 1000Base-TVoltage Required:AC 120/230 V ( 50/60 Hz )Flow control auto-uplink (auto MDI/MDI-X) ; Compliant Standards :FCC Class A certified VCCI EN 60950 ICES-003 IEC 60950 UL 60950 CSA 22.2 No. 60950 FCC Part 15 B EN 55022SystemNetworking / Compliant Standards:IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.1p IEEE 802.3xInterfaces:8 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45UNSPSC CodeUNSPSC Code:43222612Product IDUPC:882780979895Manufacturer Part:J9077A#ABA

Click here for more information about HP ProCurve Switch 1400-8G 8-Port 10/100/1000 Gigabit Network Switch

Read More...

NETGEAR XAVB101 Powerline AV Ethernet Adapter Kit Review

Average Reviews:

(More customer reviews)Have had Directv for years. Felt it was about time for me to upgrade to one of their new products......I think technology has left my old brain in the dust! Anyway, I got the HD DVR, which is capable of VOD (video on demand). To use this service it requires a hook up from the internet router to the Directv receiver. Well, my router is in the den and no where close enough to the new HD equipment. I really felt that the digital video recorder and the receiver would be the extent of my use. I was reading about the Netgear Powerline Adapter and was hoping it would solve the VOD hookup problem (terrible to have something and not be able to use it). Was thinking I would have to call someone in to help set this up, as my lack of understand electronics would amaze anyone. The product arrived, hardly any instructions. The two units plug into a wall electrical outlet, one in each room. The one in the den plugs into the Linksys wireless G router with the supplied Ethernet cable, the second unit plugs into an electrical outlet near the TV and the satellite box, hooked up with a second Ethernet cable. Now the unbelievable part of the story----the whole thing works and I did it myself! I am bragging because I have a problem screwing in a light bulb. Now, thanks to the Powerline AV kit I have video on demand, which I thought I would never get to use. I am sure if you can plug in a toaster you will have no problem hooking this up. Hope I didn't bore you with this, but you must understand this is a major accomplishment for me.

Click Here to see more reviews about: NETGEAR XAVB101 Powerline AV Ethernet Adapter Kit

The award-winning NETGEAR XAVB101 Powerline AV Ethernet Adapter Kit includes everything you need to extend a network connection using the electrical wiring in your home. With this kit, you can network your game consoles, PCs, DVRs, network storage devices, and other components without suffering from weak wireless signals or unsightly cables running through your home. If you're looking for a fast, easy, and reliable way to provide Ethernet connectivity to the farthest reaches of your home, then this kit is the perfect solution.
Plug-and-Play Setup Gets You Going Fast A PC Magazine Editor's Choice, the Powerline AV is a snap to set up. Just plug one XAV101 adapter into an available electrical socket near your router, and connect your router to it. Then plug thesecond XAV101 adapter into any electrical socket that's located near the device you want to network. When you connect your device into the XAV101, it will be connected to your network.
It's as simple as that. There's no software to install, no passwords to remember, and no configuration whatsoever. And you can easily create more network connections throughout your home by simply installing additional adapters.
If you wish to make more network connections, you just have to purchase and connect additional NETGEAR XAV101 Powerline AV Ethernet Adapters.
Fast Network Connection for Media Streaming The Powerline AV supports the Homeplug AV protocol and delivers up to 200 Mbps network speed, fast enough for high-quality HD video streaming, music streaming, gaming, and VoIP (Voice-over-Internet Protocol) telephone calls. The Powerline AV Ethernet adapter is perfect for devices such as TiVo, Slingbox, Xbox 360, Playstation 3, networked televisions, and more.
Push-Button Security for Extra Safety Unlike wireless connections, a Powerline network connection is secure. The XAV101 supports 128-bit AES encryption. Setting up a secure connection with the Powerline is as simple as pushing a button. And for the ultimate in convenience, the Powerline also features three different colored LEDs that give information on Power, Network Status, and Ethernet connections.
Each adapter measures 2.83 x 3.86 x 1.57 inches (WxHxD) and is backed by a one-year warranty.
What's in the Box Two Powerline AV Ethernet Adapters, 5-foot Ethernet cable, installation guide, setup CD, warranty card, support and information card.

Get 13% OFF

Click here for more information about NETGEAR XAVB101 Powerline AV Ethernet Adapter Kit

Read More...

Linksys Compact Wireless-G Internet Video Camera Review

Average Reviews:

(More customer reviews)The image quality of this camera isn't great, and as the other reviewer states, it needs lots of light. The resolution of the video is fairly poor, comparable to a very cheap 4-year-old webcam. If you need to see detail in the image (e.g. for certain security-camera purposes), then it will not work.
Another thing to note is that this camera is much bigger than it looks--it is about the size of your hand. I was hoping to squeeze it into a tight space, but the camera's size took me by surprise. It will be difficult to hide this camera if you are hoping to use it for hidden security purposes.
In sum, if you need a cheap camera that can sit out in the open and take low-detail video of a well-lit room, then this is your product. Otherwise, you should look for more professional (or wired) cameras.

Click Here to see more reviews about: Linksys Compact Wireless-G Internet Video Camera

The Linksys Compact Wireless-G Internet Video Camera sends live video through the Internet to a web browser anywhere in the world! This compact, self-contained unit lets you keep track of your home, your kids, your workplace -- whatever's important to you. Unlike standard "web cams" that require an attached PC, the Internet Video Camera contains its own web server, so it can connect directly to a network, either over Wireless-G (802.11g) networking, or over 10/100 Ethernet cable. The advanced MPEG-4 video compression produces a high-quality, high-frame rate, up to 320x240 video stream. The Compact Internet Video Camera's unique form-factor and wireless connectivity allows you to mount it on a wall nearly anywhere, or slip it into its included stand for desktop use. Once it's connected to your home network, you can "see what it sees" from any Windows-based PC in the house, while the video stream is secured from the outside world, hidden behind your Router. If you want the video to be visible from outside your home network, you can open an appropriate port on the Router, and then create password protected accounts to manage access to the camera, or leave it wide open for the world to see. The SoloLink domain service (trial sign-up included) lets you access your camera using an easy-to-remember "name", even if your home Internet connection uses a dynamic IP address.

Click here for more information about Linksys Compact Wireless-G Internet Video Camera

Read More...

Cisco-Linksys BEFCMU10 Ethernet Cable Modem Review

Average Reviews:

(More customer reviews)First I need to thank all of you guys who gave the Linksys cable modem 4 and 5 stars. If it had not been for your reviews I would have sent this great modem back to Amazon.
I spent 6 hours trying to get this modem working, getting help from 4 different techs at AT&T. They told me that this modem was bad and that the cable light needed to stay on and that the Linksys modem would not register with their system. They told me I needed to send it back and get another one. {ALL FALSE} So finally I told them to connect my (their) old modem back up. Their modem worked fine.
As I was getting ready to pack my new Linksys modem up to send it back to Amazon. I decided to try it one more time. Following the exact sequence they used to connect their modem. And would you believe it? It works!!!
My problems:
1. bad tech support.
2. must remove router to register modem.
3. given wrong registration address. (MOST IMPORTANT)
4. computer must be turned off before you turn on modem.
Fool proof procedure to be up and running in 10 minutes:
1. Turn computer off.
2. If you have a router, take it out of the loop. connect directly from your computer to the modem thru the ethernet port.
3. Connect the cable.
4. turn on power to the Linksys modem, allow it to boot up.
5. turn on your computer
6. go to the registration page to register your modem. You MUST do this twice, for some reason it does not work the first time. MAKE SURE YOU GET THE RIGHT ADDRESS FROM AT&T. They failed to tell me I needed to use "https://" instead of "http://" it won't work without the "s"
enter your account # and registration #.
7. You should be working. Reconnect your router.

Click Here to see more reviews about: Cisco-Linksys BEFCMU10 Ethernet Cable Modem

If you're tired of the slow & frustrating performance of 56k modems & dial-up Internet providers, then your salvation is here in the form of the Linksys BEFCMU10 EtherFast Cable Modem. With a cable modem you are always connected to the Internet & you will experience speeds many times that of standard 56k modems. And it's easy to use. Just plug the plug-and-play device into any USB port on your PC. You can even plug it into your Ethernet port or an optional Linksys Router for easy Internet sharing through the home. Weight - 1lb.

Click here for more information about Cisco-Linksys BEFCMU10 Ethernet Cable Modem

Read More...

Cisco-Linksys Dual-Band Wireless A/G Media Center Extender WMCE54AG Review

Average Reviews:

(More customer reviews)I really like this product. I really like Media Center 2005. But more than anything else, I LOVE the IDEA of this product -- a networked device that helps unite the living room to the home office, giving you one place to put your pictures, videos, and music. This is a great generation one product. I can't wait to see what the next couple of generations bring.
That said, here are the things to be aware of when purchasing:
1) You need to know (or find someone to help you who knows) the basic fundamentals of home networking and Windows. This is not a completely plug and play installation.
2) You must have a very strong network connection between your Media Center 2005 device and your Media Center Extender. Ideally, you would have a wired connection (i.e., using old fashion cables). But I use the Wireless-G option and it works great now -- but I had to spend a good deal of time tuning the placement of my wireless router to ensure optimal connectivity between PC and Extender.
3) Be aware: TV content labeled as Copy Protected will not play on the Media Center Extender. For me, this means one very bad thing -- I can't watch 99% of the shows on HBO on the Extender. This is very disappointing for our family, because we enjoy HBO and actually use the Extender on our main TV in the house (with the Media Center 2005 PC in our home office). Pay TV channels are the only area we have had problems with this, though, so if you don't need to watch these channels on the TV where you are putting the extender, don't worry about it.
4) There are a few other things you can do on the Media Center PC that you can't do on the extender. Mainly for me--the extender can't play content on your Media Center PC DVD drive (I get around this by first burning the DVD to my hard-drive using a product called Pocket DVD -- a perfect solution to put my son's frequently watched kid movies in a place that's easily accessible).
Overall, if you already have Media Center 2005 -- buy this product--it's really cool to have a central hub for all this content with multiple TVs hanging off it.
If you don't already have Media Center 2005, and are considering it -- I recommend it. But be forewarned that it's still what I would call an "early adopter" solution. Be prepared for a few stumbles and bumps -- but it's sure to wow your techie buddies.

Click Here to see more reviews about: Cisco-Linksys Dual-Band Wireless A/G Media Center Extender WMCE54AG

Bring your Windows Media Center PC's digital movies, live and recorded TV, pictures and music out into the living room! The Linksys Dual-Band Wireless A/G Media Center Extender lets you bring the digital entertainment available through and stored on your Windows Media Center PC to your Home Entertainment Center, without running cables through the house.Using a Wireless-A, Wireless-G, or wired Ethernet connection, the Media Center Extender displays home-made or downloaded digital movies and your digital photographs on the TV for the whole family to enjoy.And your digital music collection is finally freed from those little computer speakers and can play in full glory through your stereo system.You can also watch and pause live TV shows, or record them digitally for later viewing.Finding something to watch is easy with the free on-screen program guide.

Click here for more information about Cisco-Linksys Dual-Band Wireless A/G Media Center Extender WMCE54AG

Read More...

Cisco-Linksys Media Center Extender with DVD Review

Average Reviews:

(More customer reviews)My initial impression are (1) if all you want is a media center extender to do what it is intended to do, then this is definitely the purchase you should make; (2) do not expect anything other than just the media center function and dvd function, that's all your going to get; (3) if the video, music, or picture is not supported by windows media connect *** AND HAS THE CORRECT BITRATE*** it is not going to play; (4) even if your media center pc can playback a file doesn't necessarily mean the extender will play it back, all the processing of the file is done on the extender and the only codecs that get supported are those listed in windows media connect.
I was expecting better codec support from Linksys, but it looks as if Linksys only has their name on the product. It really should have Microsoft on it. You don't need a Vista PC for playback of the dvd function. For you people that like to encode video on your computer and are thinking about using an extender to view it, be careful which format you choose. If it not listed as a supported file by windows media connect you can best believe it is not going to play.
The wireless worked pretty well. I have wireless-n and video playback was great, but navigating through the menus with wireless was sluggish. A wired connection was more responsive but still a little sluggish. Startup time until you get to the main menu is between 30-40 seconds. The unit is absolute noiseless. Even the dvd drive is quiet during playback, fastforwarding and rewinding.
This purchase was not for me. Like i've said many times before, you'll only be satisfied if your files are supported in windows media connect formats. I could not get WMV files to playback, but I could get WMV9 files to playback. I tried a DivX file in a AVI extension and it played fine.

Click Here to see more reviews about: Cisco-Linksys Media Center Extender with DVD

Sharing your photos, music and movies on your computer with friends and family has been made easy by the DMA 2200 Media Center Extender from Linksys. The device allows you to view digital photos, movies and high definition programs on your TV, and listen to downloaded music on your home theater sound system. It even enables accessing digital content and Internet services from your Microsoft Windows Vista Premium or Ultimate Media Center PC and wirelessly stream it to your home entertainment system. Its single learning remote helps you to easily navigate menus. The media extender uses existing high-speed Wireless-N home network and includes built-in upscaling DVD player.

Get 24% OFF

Click here for more information about Cisco-Linksys Media Center Extender with DVD

Read More...

D-Link Xtreme N Duo Wireless Bridge/Access Point DAP-1522 - Wireless access point - external Review

Average Reviews:

(More customer reviews)I needed a wireless bridge so that I could move my printer to a room with no jacks. The D-Link DAP-1522 had great reviews, and a bridge should work with any environment. Not this one.
* The router's wireless settings can not be configured without Internet Explorer (a Linux user like me has to fire up a VM).
* The bridge would not relay DHCP responses from the wireless network to the attached wired devices. D-Link support says that is because I am using a Linux router (though it shouldn't make a difference). If I configured static IP addresses on my wired devices, they worked great.
* D-Link has not released new firmware in over a year, so I doubt that these problems will get fixed.
* D-Link support was "lacking" (and don't get me started on Office Depot's awful return policy).
* Custom firmwares like dd-wrt or tomato won't work on this device, so there is no easy way to correct these problems.
In short, I can get it to do what I want, but it's a lot of hassle.

Click Here to see more reviews about: D-Link Xtreme N Duo Wireless Bridge/Access Point DAP-1522 - Wireless access point - external

Use the D-Link Xtreme N Duo Wireless Bridge / Access Point (DAP-1522) to connect up to 4 Ethernet-enabled devices such as Game Consoles, Digital Video Recorders (DVR), and Digital Media Adapters (DMA) to your wireless network. Connect the D-Link DAP-1522 to an existing wired network and easily enable wireless connectivity in your home. Use your new wireless network to stream HD multimedia content, play multiplayer games, or make Internet phone calls (VoIP). The DAP-1522 has selectable 2.4GHz or 5GHz bands. 5GHz is ideal for wirelessly streaming multiple HD videos across your network. It helps avoid interference by providing a clearer wireless band for HD signals than existing 2.4GHz products. The Wireless Bridge feature of the DAP-1522 allows you to easily connect up to 4 Ethernet-enabled devices in your entertainment center to your wireless network. Connect devices such as Game Consoles, Digital Video Recorders (DVR), and Digital Media Adapters (DMA) to the built-in 4-Port Gigabit Switch.

Click here for more information about D-Link Xtreme N Duo Wireless Bridge/Access Point DAP-1522 - Wireless access point - external

Read More...

Cisco-Linksys PSUS4 PrintServer for USB with 4 Port Switch Review

Average Reviews:

(More customer reviews)Like a number of the other reviews mentioned, the PSUS4 works fine as a printserver but the included setup software isn't worth even removing from the box. I am by no means a networking expert but I had the time to tinker with the device and found that you really need to be ready to configure the PSUS4 directly using your browser and then configure each computer for local printing by creating a new TCP/IP port using the IP address of the unit and configuring it for printing to "USB1". If this sounds complicated it really isn't and with a bit of searching you can find quick and easy instructions from an article on the Linksys website (note the lack of mentioning USB1 in the article).
Long story short, don't buy this if you want plug and play but if you have a basic understanding of networking you will find this works fine after a bit of a painful initial setup. I found that it took much longer just to find the information I needed than actually setting up the unit.

Click Here to see more reviews about: Cisco-Linksys PSUS4 PrintServer for USB with 4 Port Switch

Share your USB printer and expand your network with one compact box The Linksys PrintServer for USB with 4-Port Switch is a double upgrade for your network. First, it lets you connect a USB printer directly to your network, eliminating the need to dedicate a PC to print serving chores. Using a PrintServer frees up your print share PC so you dont have to leave it on all the time. It also removes the printing bottleneck, and sets your PC free to do more useful work. In addition, the PrintServer includes a 4-port 10/100 switch, so you can easily add more devices to your network. All four ports are auto speed negotiating, and have automatic MDI/MDI-X crossover detection, so you dont have to worry about the cable type.

Click here for more information about Cisco-Linksys PSUS4 PrintServer for USB with 4 Port Switch

Read More...