Average Reviews:
(More customer reviews)This is a very good router, but I had issues during setup. I have Qwest DSL and the DIR-615 wizard setup couldn't auto-configure the router to provide internet service.
Most routers use an intranet address in the range of 192.168.x.x and then devices connected to the router are assigned within that ip range. I finally manually played with the settings and still couldn't get it to work. Frustrated, I called Qwest thinking the problem was with the DNS values. That assumption was incorrect and generally Qwest DSL requires no tweaking at the router level. Qwest DSL tech support was great. They said it was a setup issue with the router and called Dlink's tech team on a Sunday morning and we had a 3-way call. Dlink's technician had me fixed up in 3 minutes.
Here's what worked for me. Under the router's 'network settings' we set the router IP address to 172.16.0.1 and the subnet mask to 255.255.0.0. If not checked, enable "DHCP Server". Under 'Wireless' set the Channel to 11 and the Mode to "Mixed" to support 802.11b,g,n. I set security to WPA-Personal. Be sure to save the configuration and this will cause the router to reboot. If things don't work immediately, unplug the modem to cold-start the system, wait a minute and finally plug in the router.
Contrary to what someone wrote in a review, this router does indeed support wireless-N devices in a mixed environement and does not downstep to G for the whole network.
Remember, you can't setup the router via wireless. You have to use an ethernet cable from your pc to port #1 on the router. Another cable runs from the router Internet port to the dsl modem.
Before calling tech support, first confirm that the modem is working. Run a cable from the pc to the modem and confirm you can browse the Internet. With the modem eliminated as an issue, the tech people can quickly help you configure the router. I'm using Vista and the setup process did not require any Windows firewall changes so keep the firewall 'On'.
I may be wrong but here's what I think the core setup problem was for me. The Qwest DSL modem uses a DHCP Default Gateway of 192.168.0.1. This is the same IP the Dlink router attempts to use as its address. Thus you end up with an IP addresss conflict since both can't use the same address. The Dlink technician changed the router address to a different subnet in 172.16.x.x and eliminated the conflict.
Click Here to see more reviews about: D-Link DIR-615 Wireless N Router, 4-Port
The D-Link Wireless N Router (DIR-615) provides a better wireless signal for your network than existing wireless 802.11g technology.
Click here for more information about D-Link DIR-615 Wireless N Router, 4-Port
0 comments:
Post a Comment